Hakel India New Delhi, Delhi

Send SMS
Contact Us

Lightning and surge arresters

Lightning and Switching Surge Arresters

Lightning and Switching Surge Arresters

Approx. Rs 6,000 / Piece

Hakel Combi Set is lightning and surge arrester type 1+2 according to EN 61643-11 and IEC 61643-1. These are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 2 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.
Hakel Combi Set is a combination of the latest technologies where the spark gap combines the varistor. The set contains lightning arresters of HS series and surge arresters of PIII series. HCS can be installed in every common switchboard and its special construction is intended for using in non-measurable parts of electrical systems.

HCS/3+0 can be used in industrial installations such as substations, main switchboards of large industrial structures and also places with high risk of a direct lightning strikes occurance. This device is intended for use in TNC power supply system.

Surge Protection For Industries

Surge Protection For Industries

Approx. Rs 6,000 / Piece

In harsh industrial environments maximization of operations is imperative. The downtime, damage, & destruction caused to mission critical systems costs businesses millions of ruppees each year.

When selecting an SPD for a given application, there are several considerations that must be made:

 

Lightning And Surge Arrester

Lightning And Surge Arrester

Approx. Rs 6,000 / Piece

Hakel Combi Set is lightning and surge arrester type 1+2 according to EN 61643-11 and IEC 61643-1. These are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 2 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.
Hakel Combi Set is a combination of the latest technologies where the spark gap combines the varistor. The set contains lightning arresters of HS series and surge arresters of PIII series. HCS can be installed in every common switchboard and its special construction is intended for using in non-measurable parts of electrical systems.

HCS/3+1 can be used in industrial installations such as substations, main switchboards of large industrial structures and also places with high risk of a direct lightning strikes occurance. This device is intended for use in TNS and TT power supply systems.

Lightning Arrester For The Commercial Buildings

Lightning Arrester For The Commercial Buildings

Approx. Rs 5,000 / Piece

SPC is lightning and surge arrester type 1+2 according to EN 61643-11. These are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The SPC 12,5 is intended for use in TNC systems (1+0 or 3+0). For TNS and TT systems (1+1 or 3+1) the SPC 12,5 is equipped with high energy gas discharge tube for equipotential bonding between N and PE.

The main use of SPC12,5 arrester is in structures of LPL II according to EN 62305, e.g. industrial and administration buildings, schools, supermarkets and cathedrals.

Function of remote monitor terminals

When the SPC12,5 DS is operating correctly, the terminations 1-2 are connected to normally closed contacts, 2-3 are normally open. If the internal varistor component is damaged as a result of thermal overloading, terminations 1-2 will then be open and 2-3 closed.

Combined Surge Protection for main LT panels

Combined Surge Protection for main LT panels

Approx. Rs 3,000 / Piece

The SPC25 is intended for use in TNC systems (1+0 or 3+0). For TNS and TT systems (1+1 or 3+1) the SPC25 is equipped with high energy gas discharge tube for equipotential bonding between N and PE.

The main use of SPC25 arrester is in structures of LPL I according to EN 62305, e.g. hospitals, banks, mobile operator stations, water-stations, power plants, airport buildings for air traffic control and all structures with explosive risk.

To be installed in the main switchboard.

Function of remote monitor terminals
When the SPC25 DS is operating correctly, the terminations 1-2 are connected to normally closed contacts, 2-3 are normally open. If the internal varistor component is damaged as a result of thermal overloading, terminations 1-2 will then be open and 2-3 closed.

Surge Protector

Surge Protector

Approx. Rs 4,000 / Piece

SPC is lightning and surge arrester type 1+2 according to EN 61643-11. These are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The SPC 12,5 is intended for use in TNC systems (1+0 or 3+0). For TNS and TT systems (1+1 or 3+1) the SPC 12,5 is equipped with high energy gas discharge tube for equipotential bonding between N and PE.

The main use of SPC12,5 arrester is in structures of LPL II according to EN 62305, e.g. industrial and administration buildings, schools, supermarkets and cathedrals.

Function of remote monitor terminals

When the SPC12,5 DS is operating correctly, the terminations 1-2 are connected to normally closed contacts, 2-3 are normally open. If the internal varistor component is damaged as a result of thermal overloading, terminations 1-2 will then be open and 2-3 closed.

Surge Arresters for AC Drives

Surge Arresters for AC Drives

Approx. Rs 5,000 / Piece

SPC is lightning and surge arrester type 1+2 according to EN 61643-11. These are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The SPC 12,5 is intended for use in TNC systems (1+0 or 3+0). For TNS and TT systems (1+1 or 3+1) the SPC 12,5 is equipped with high energy gas discharge tube for equipotential bonding between N and PE.

The main use of SPC12,5 arrester is in structures of LPL II according to EN 62305, e.g. industrial and administration buildings, schools, supermarkets and cathedrals.

Function of remote monitor terminals

When the SPC12,5 DS is operating correctly, the terminations 1-2 are connected to normally closed contacts, 2-3 are normally open. If the internal varistor component is damaged as a result of thermal overloading, terminations 1-2 will then be open and 2-3 closed.

Ac Dc Drives Surge Protection

Ac Dc Drives Surge Protection

Approx. Rs 7,000 / Set

The SPC25 is intended for use in TNC systems (1+0 or 3+0). For TNS and TT systems (1+1 or 3+1) the SPC25 is equipped with high energy gas discharge tube for equipotential bonding between N and PE.

The main use of SPC25 arrester is in structures of LPL I according to EN 62305, e.g. hospitals, banks, mobile operator stations, water-stations, power plants, airport buildings for air traffic control and all structures with explosive risk.

To be installed in the main switchboard.

Function of remote monitor terminals
When the SPC25 DS is operating correctly, the terminations 1-2 are connected to normally closed contacts, 2-3 are normally open. If the internal varistor component is damaged as a result of thermal overloading, terminations 1-2 will then be open and 2-3 closed.

Surge Arresters

Surge Arresters

Approx. Rs 1,500 / Piece

SPC is lightning and surge arrester type 1+2 according to EN 61643-11. These are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The SPC 12,5 is intended for use in TNC systems (1+0 or 3+0). For TNS and TT systems (1+1 or 3+1) the SPC 12,5 is equipped with high energy gas discharge tube for equipotential bonding between N and PE.

The main use of SPC12,5 arrester is in structures of LPL II according to EN 62305, e.g. industrial and administration buildings, schools, supermarkets and cathedrals.

Function of remote monitor terminals
When the SPC12,5 DS is operating correctly, the terminations 1-2 are connected to normally closed contacts, 2-3 are normally open. If the internal varistor component is damaged as a result of thermal overloading, terminations 1-2 will then be open and 2-3 closed.

Lightning & Switching Surge Arrester

Lightning & Switching Surge Arrester

Approx. Rs 5,000 / Piece

The SPC25 is intended for use in TNC systems (1+0 or 3+0). For TNS and TT systems (1+1 or 3+1) the SPC25 is equipped with high energy gas discharge tube for equipotential bonding between N and PE.

The main use of SPC25 arrester is in structures of LPL I according to EN 62305, e.g. hospitals, banks, mobile operator stations, water-stations, power plants, airport buildings for air traffic control and all structures with explosive risk.

To be installed in the main switchboard.

Function of remote monitor terminals

When the SPC25 DS is operating correctly, the terminations 1-2 are connected to normally closed contacts, 2-3 are normally open. If the internal varistor component is damaged as a result of thermal overloading, terminations 1-2 will then be open and 2-3 closed.

Safety Connecting Lead

Safety Connecting Lead

Approx. Rs 2,000 / Set

P2011
Safety connecting lead, black, 2 m
X
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Lightning and surge arresters ?

    country-ico

    We will contact you soon !

    Anurag Gupta

    (Director)

    Hakel India

    Patparganj, New Delhi, Delhi, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us