Hakel India New Delhi, Delhi

Send SMS
Contact Us

Arresters For Protection Of Power Supply Systems Up To 1000 V

Lightning Arresters

Lightning Arresters

Approx. Rs 2,500 / Unit

PIV12,5-275

PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.
The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is  necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.
The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305,  e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

Lightning Arresters

Lightning Arresters

Approx. Rs 4,500 / Set

PIV12,5-440
PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.
The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is  necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.
The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305,  e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

Lightning Arresters

Lightning Arresters

Approx. Rs 5,500 / Set

PIV850 is modular lightning arrester type 1 according to EN 61643-11. Complete device consist of a base part and pluggable module. These arresters are  recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.
The PIV850 is mainly intended for use in TNC systems. For TNS and TT systems it is necessary to combine these arresters with lightning arrester B25 or B50 which are intended for equipotential bonding between N and PE.
The main use of PIV850 arrester is in structures of LPL III – IV according to EN 62305, e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

Lightning Arresters

Lightning Arresters

Approx. Rs 2,500 / Unit

PIV12,5-275 DS

PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.
The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is  necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.
The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305,  e.g. residential houses with cable supply and subdistribution boards of big industrial structures.
Function of remote monitor terminals
When the PIV DS is operating correctly, the terminations 1-2 are connected to normally closed contacts, 2-3 are normally open. If the internal varistor component is damaged as a result of thermal overloading, terminations 1-2 will then be open and 2-3 closed.

B100 Lightning Arresters

B100  Lightning Arresters

Approx. Rs 2,500 / Unit

B25, B25M, B50, B80 and B100 are total current gas discharge tubes type 1 according to EN 61643-11 and are intended for use in TNS and TT systems (3+1 or 1+1) at the boundaries of LPZ 0 – 1. B25, B25M, B50, B80 and B100 are to be installed between N and PE only.

PIV12,5-275 Lightning Arresters

PIV12,5-275 Lightning Arresters

Approx. Rs 2,500 / Unit

PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is  necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.
The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305,  e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

PIV12,5-440 Lightning Arresters

PIV12,5-440 Lightning Arresters

Approx. Rs 3,000 / Unit

PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is  necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.
The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305,  e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

PIV-850 Lightning Arresters

PIV-850 Lightning Arresters

Approx. Rs 5,500 / Unit

PIV850 is modular lightning arrester type 1 according to EN 61643-11. Complete device consist of a base part and pluggable module. These arresters are  recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The PIV850 is mainly intended for use in TNC systems. For TNS and TT systems it is necessary to combine these arresters with lightning arrester B25 or B50 which are intended for equipotential bonding between N and PE.

The main use of PIV850 arrester is in structures of LPL III – IV according to EN 62305, e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

PIV12,5-275 DS Lightning Arresters

PIV12,5-275 DS Lightning Arresters

Approx. Rs 2,500 / Unit

PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is  necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.
The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305,  e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

Function of remote monitor terminals

When the PIV DS is operating correctly, the terminations 1-2 are connected to normally closed contacts, 2-3 are normally open. If the internal varistor component is damaged as a result of thermal overloading, terminations 1-2 will then be open and 2-3 closed.

PIV12,5-440 DS Lightning Arresters

PIV12,5-440 DS Lightning Arresters

Approx. Rs 3,000 / unit

PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is  necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.

The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305,  e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

Function of remote monitor terminals

When the PIV DS is operating correctly, the terminations 1-2 are connected to normally closed contacts, 2-3 are normally open. If the internal varistor component is damaged as a result of thermal overloading, terminations 1-2 will then be open and 2-3 closed.

PIV12,5-150 Lightning Arresters

PIV12,5-150 Lightning Arresters

Approx. Rs 2,500 / Unit

PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is  necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.

The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305,  e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

PIV12,5-150 DS Lightning Arresters

PIV12,5-150 DS Lightning Arresters

Approx. Rs 2,500 / Unit

PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is  necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.

The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305,  e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

Function of remote monitor terminals

When the PIV DS is operating correctly, the terminations 1-2 are connected to normally closed contacts, 2-3 are normally open. If the internal varistor component is damaged as a result of thermal overloading, terminations 1-2 will then be open and 2-3 closed.

B50 Arresters

B50 Arresters

Approx. Rs 2,500 / Unit

B25, B25M, B50, B80 and B100 are total current gas discharge tubes type 1 according to EN 61643-11 and are intended for use in TNS and TT systems (3+1 or 1+1) at the boundaries of LPZ 0 – 1. B25, B25M, B50, B80 and B100 are to be installed between N and PE only.

PIV12,5-75 Lightning Arresters

PIV12,5-75 Lightning Arresters

Approx. Rs 2,500 / Unit

PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.

The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305, e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

PIV12,5-75 DS Lightning Arresters

PIV12,5-75 DS Lightning Arresters

Approx. Rs 2,500 / Unit

PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is  necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.

The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305,  e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

Function of remote monitor terminals

When the PIV DS is operating correctly, the terminations 1-2 are connected to normally closed contacts, 2-3 are normally open. If the internal varistor component is damaged as a result of thermal overloading, terminations 1-2 will then be open and 2-3 closed.

HS55 Lightning Arresters

HS55 Lightning Arresters

Approx. Rs 3,500 / Unit

HS50-50 and HS55 are a lightning arresters type 1 according to EN 61643-11 and IEC 61643-1. These are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding in power supply systems entering the building.

The lightning arresters are constructed as an encapsulated multiple spark gaps for installation in main switchboards. They are is mainly intended for use in TNC systems. For TNS and TT systems it is necessary to combine these arresters with lightning arrester HS100 (or JK110) which is recommended for equipotential bonding between N and PE.

HS55 arrester is intended for special installations in industrial buildings requiring max. continuous operating voltage of 440 V AC. The main use of HS55 arrester is in main switchboards of large industrial buildings and places with high risk of a direct lightning strike.

HS50-50 Lightning Arresters

HS50-50 Lightning Arresters

Approx. Rs 3,000 / Piece

HS50-50 and HS55 are a lightning arresters type 1 according to EN 61643-11 and IEC 61643-1. These are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding in power supply systems entering the building.

The lightning arresters are constructed as an encapsulated multiple spark gaps for installation in main switchboards. They are is mainly intended for use in TNC systems. For TNS and TT systems it is necessary to combine these arresters with lightning arrester HS100 (or JK110) which is recommended for equipotential bonding between N and PE.

The main use of HS50-50 is in industrial installations such as transformers, the main switchboards of large industrial buildings and places with high risk of a direct lightning strike. It is also suitable for applications in unmeasured parts of electrical installation (before electrometer) according to VDN Directive, 2nd Edition 2004 (TAB 2000).

HS100 Arresters

HS100 Arresters

Approx. Rs 3,000 / Unit

HS100 is a total current spark gap type 1 according to EN 61643-11 and IEC 61643-1 and is intended for use in TNS and TT systems (3+1 or 1+1) at the boundaries of LPZ 0 – 1. HS100 is to be installed between N and PE only.

HCS/3 0 Lightning Arresters

HCS/3 0 Lightning Arresters

Approx. Rs 12,000 / Unit

Hakel Combi Set is lightning and surge arrester type 1+2 according to EN 61643-11 and IEC 61643-1. These are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 2 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

Hakel Combi Set is a combination of the latest technologies where the spark gap combines the varistor. The set contains lightning arresters of HS series and surge arresters of PIII series. HCS can be installed in every common switchboard and its special construction is intended for using in non-measurable parts of electrical systems.

HCS/3+0 can be used in industrial installations such as substations, main switchboards of large industrial structures and also places with high risk of a direct lightning strikes occurance. This device is intended for use in TNC power supply system.

HCS/3 0 DS Lightning Arresters

HCS/3 0 DS Lightning Arresters

Approx. Rs 12,000 / Unit

Hakel Combi Set is lightning and surge arrester type 1+2 according to EN 61643-11 and IEC 61643-1. These are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 2 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

Hakel Combi Set is a combination of the latest technologies where the spark gap combines the varistor. The set contains lightning arresters of HS series and surge arresters of PIII series. HCS can be installed in every common switchboard and its special construction is intended for using in non-measurable parts of electrical systems.

HCS/3+0 can be used in industrial installations such as substations, main switchboards of large industrial structures and also places with high risk of a direct lightning strikes occurance. This device is intended for use in TNC power supply system.

HCS/3 1 Surge Arresters

HCS/3 1 Surge Arresters

Approx. Rs 13,500 / Unit

Hakel Combi Set is lightning and surge arrester type 1+2 according to EN 61643-11 and IEC 61643-1. These are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 2 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

Hakel Combi Set is a combination of the latest technologies where the spark gap combines the varistor. The set contains lightning arresters of HS series and surge arresters of PIII series. HCS can be installed in every common switchboard and its special construction is intended for using in non-measurable parts of electrical systems.

HCS/3+1 can be used in industrial installations such as substations, main switchboards of large industrial structures and also places with high risk of a direct lightning strikes occurance. This device is intended for use in TNS and TT power supply systems.

HCS/3 1 DS Lightning Arresters

HCS/3 1 DS Lightning Arresters

Approx. Rs 13,500 / Unit

Hakel Combi Set is lightning and surge arrester type 1+2 according to EN 61643-11 and IEC 61643-1. These are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 2 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

Hakel Combi Set is a combination of the latest technologies where the spark gap combines the varistor. The set contains lightning arresters of HS series and surge arresters of PIII series. HCS can be installed in every common switchboard and its special construction is intended for using in non-measurable parts of electrical systems.

HCS/3+1 can be used in industrial installations such as substations, main switchboards of large industrial structures and also places with high risk of a direct lightning strikes occurance. This device is intended for use in TNS and TT power supply systems.

JK110 Lightning Arresters

JK110 Lightning Arresters

Approx. Rs 3,000 / Unit

HS50-50 and HS55 are a lightning arresters type 1 according to EN 61643-11 and IEC 61643-1. These are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding in power supply systems entering the building.

The lightning arresters are constructed as an encapsulated multiple spark gaps for installation in main switchboards. They are is mainly intended for use in TNC systems. For TNS and TT systems it is necessary to combine these arresters with lightning arrester HS100 (or JK110) which is recommended for equipotential bonding between N and PE.

JK110 is a total current spark gap type 1 according to EN 61643-11 and is intended for use in TNS and TT systems (3+1 or 1+1) at the boundaries of LPZ 0 – 1. JK110 is to be installed between N and PE only.

HZ110 Lightning Arresters

HZ110 Lightning Arresters

Approx. Rs 3,000 / Unit

HZ110 is a lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding in power supply systems entering the building.

The lightning arrester is constructed as an encapsulated multiple spark gap for installation in main switchboards. HZ110 is mainly intended for use in TNC systems.

High-power lightning arrester HZ110 is intended for use in areas with a high frequency of storm days. The main use of HZ110 arrester is in industrial installations such as transformers or the main switchboards of large industrial buildings.

HG150 Lightning Arresters

HG150 Lightning Arresters

Approx. Rs 3,000 / Unit

HG150 is a lightning arrester type 1 according to EN 61643-11. These are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding in power supply systems entering the building.

The lightning arrester is constructed as a gas discharge tube for installation in main
switchboards. HG150 is intended for use in TNS and TT systems between N/PE only.

High-power lightning arrester HG150 is intended for use in areas with a high frequency of storm days. The main use of HG150 arrester is in industrial installations such as transformers or the main switchboards of large industrial buildings.

HZ110/3 0 Arresters

HZ110/3 0 Arresters

Approx. Rs 9,500 / Unit

Max. continuous operating voltage UC 255 V AC
Lightning impulse current (10/350) Iimp 110 kA Nominal impulse discharge current (8/20) In 50 kA Voltage protection level Up < 2,5 kV Max. back-up fuse 500 AgL/gG

HZ110/500 Lightning Arresters

HZ110/500 Lightning Arresters

Approx. Rs 3,000 / Unit

HZ110 is a lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding in power supply systems entering the building.

The lightning arrester is constructed as an encapsulated multiple spark gap for  installation in main switchboards. HZ110 is mainly intended for use in TNC systems.

High-power lightning arrester HZ110/500 is intended for use in areas with a high frequency of storm days. The main use of HZ110/500 arrester is in industrial installations such as main switchboards of large industrial buildings.

PIV12,5-320 DS Lightning Arresters

PIV12,5-320 DS Lightning Arresters

Approx. Rs 3,000 / Unit

PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is  necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.

The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305,  e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

Function of remote monitor terminals

When the PIV DS is operating correctly, the terminations 1-2 are connected to normally closed contacts, 2-3 are normally open. If the internal varistor component is damaged as a result of thermal overloading, terminations 1-2 will then be open and 2-3 closed.

PIV12,5-385 Lightning Arresters

PIV12,5-385 Lightning Arresters

Approx. Rs 4,500 / Unit

PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is  necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.

The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305,  e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

PIV12,5-385 DS Lightning Arresters

PIV12,5-385 DS Lightning Arresters

Approx. Rs 4,500 / Unit

PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is  necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.

The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305,  e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

Function of remote monitor terminals

When the PIV DS is operating correctly, the terminations 1-2 are connected to normally closed contacts, 2-3 are normally open. If the internal varistor component is damaged as a result of thermal overloading, terminations 1-2 will then be open and 2-3 closed.

PIV12,5-275/3 0 Lightning Arresters

PIV12,5-275/3 0 Lightning Arresters

Approx. Rs 5,500 / unit

PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is  necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.

The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305,  e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

PIV12,5-275/3 1 Lightning Arresters

PIV12,5-275/3 1 Lightning Arresters

Approx. Rs 5,500 / unit

PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is  necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.

The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305,  e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

PIV12,5-275DS/3 1 Lightning Arresters

PIV12,5-275DS/3 1 Lightning Arresters

Approx. Rs 5,500 / Unit

PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is  necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.

The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305,  e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

Function of remote monitor terminals

When the PIV DS is operating correctly, the terminations 1-2 are connected to normally closed contacts, 2-3 are normally open. If the internal varistor component is damaged as a result of thermal overloading, terminations 1-2 will then be open and 2-3 closed.

PIV12,5-275/2 0 Lightning Arresters

PIV12,5-275/2 0 Lightning Arresters

Approx. Rs 3,500 / Unit

PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is  necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.

The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305,  e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

PIV12,5-275 DS/2 0 Lightning Arresters

PIV12,5-275 DS/2 0 Lightning Arresters

Approx. Rs 2,500 / Unit

PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is  necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.

The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305,  e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

Function of remote monitor terminals

When the PIV DS is operating correctly, the terminations 1-2 are connected to normally closed contacts, 2-3 are normally open. If the internal varistor component is damaged as a result of thermal overloading, terminations 1-2 will then be open and 2-3 closed.

PIV12,5-275/1 1 Lightning Arresters

PIV12,5-275/1 1 Lightning Arresters

Approx. Rs 2,500 / Unit

PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is  necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.

The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305,  e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

PIV12,5-275 DS/1 1 Lightning Arresters

PIV12,5-275 DS/1 1 Lightning Arresters

Approx. Rs 2,500 / Unit

PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.

The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is  necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.

The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305,  e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

Function of remote monitor terminals

When the PIV DS is operating correctly, the terminations 1-2 are connected to normally closed contacts, 2-3 are normally open. If the internal varistor component is damaged as a result of thermal overloading, terminations 1-2 will then be open and 2-3 closed.

HS50-50/3 0 Lightning Arresters

HS50-50/3 0 Lightning Arresters

Approx. Rs 10,000 / Unit

HS50-50 and HS55 are a lightning arresters type 1 according to EN 61643-11 and IEC 61643-1. These are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding in power supply systems entering the building.

The lightning arresters are constructed as an encapsulated multiple spark gaps for installation in main switchboards. They are is mainly intended for use in TNC systems. For TNS and TT systems it is necessary to combine these arresters with lightning arrester HS100 (or JK110) which is recommended for equipotential bonding between N and PE.

The main use of HS50-50 is in industrial installations such as transformers, the main switchboards of large industrial buildings and places with high risk of a direct lightning strike. It is also suitable for applications in unmeasured parts of electrical installation (before electrometer) according to VDN Directive, 2nd Edition 2004 (TAB 2000).
X
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Arresters For Protection Of Power Supply Systems Up To 1000 V ?

    country-ico

    We will contact you soon !

    Anurag Gupta

    (Director)

    Hakel India

    Patparganj, New Delhi, Delhi, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us